==Phrack Inc.== Volume One, Issue Three, Phile 8 of 10 *************************************************************** * * * Making a Shock Rod * * * * By * * * * Circle Lord * * * *************************************************************** This handy little circuit is the key to generating THOUSANDS of volts of electricity for warding off attackers (notice the plural). It generates it all from a hefty 6-volt source and is easily fit into a tubular casing. Originally used as a fence charger, this circuit can be put to other uses such as: charging a whole row of lockers at school, a row of theater seats, or a metal bleacher set in the gym. More on this later. To build this, all you need is a GE-3 transistor, a 6.3-volt transformer, and a handful of spare parts from old radios. The ammount of shock you wish to generate is determined by the setting of potentiometer R1, a 15,000 ohm variable resistor. Hint: for maximum shock, set R1 at maximum! *************************************************************** Item * Description *************************************************************** C1 * 500uF, 10-WVDC electrolytic capacitor C2 * 2000uF, 15-WVDC electrolytic capacitor M1 * 6-VDC battery M2,M3 * Leads Q1 * GE-3 transistor (2n555 will also do) R1 * 15K potentiometer R2 * 160-ohm resistor S1 * Spst switch T1 * 6.3-VAC filament transformer (Triad F-14x or equiv.) X1 * 1N540 diode *************************************************************** Schematics: +---C1--------------+ 1 1 HOT 1 +-----+ 1 LEAD +---1 R1* + 1 +--->)( +-->* 1 1 1 )( 1 * +--+ 1 1 )(--> 1 1 1 1 1 1 1 TO 1 1 1 1 1 1 1 GND 1 * C2 1 +---1----+ 1 R2 1 1 1 1 1 * 1 1 1 X1 1 +---+--+--1---------1-->-+ 1 +/- 1 1 +*M1*-*S1*+ GND - ---- / / / / / / ircle / ord ---- ----